Product Focus
Sep 1, 2003 12:00 PM
Fire Alarm Station Cover
Protects manual alarm stations from false alarms
The poly-carbonate cover is used to protect manual alarm stations from false alarm, vandalism, dust and weather. The cover may be equipped with an audible alarm function, causing the unit to emit a siren sound if the cover itself is opened or tampered with. The cover is UL-tested and when operated, will not obstruct the use of the pull station.
SENTRY Station Cover
SIGNAL COMMUNICATIONS CORP.
Woburn, Mass.
CIRCLE #97 ON CARD
Fire AlarmControl Panel
Analog-addressable
The fire alarm control panel uses the supplier's SmartLink peer-to-peer protocol to connect up to 250 network nodes to meet challenging design applications. The supplier's SmartStart self-programming and XP95 fully-digital communications protocol is also featured within the control panel, enabling compatibility with new or existing wiring. The control panel uses analog sensors, addressable input and control interface devices, and remote status and control capabilities. Fully-digital single or dual SLC's support up to 126 analog points each for accurate event reporting. The SmartStart feature identifies and configures all system modules, circuits and devices to default alarm mode.
IF602 Fire Alarm Control Panel
THE GAMEWELL CO.
Northford, Conn.
CIRCLE #98 ON CARD
Addressable Control Panel
Auto-programming capabilities
The control panel has an integral remote upload/download communicator which allows for reporting of all system activity to a remote monitoring location. Using a Windows-based software package, the installer can command the panel to program itself. The panel also contains a built-in Notification Appliance Circuits (NAC) synchronization for user interfaces.
Features: panel has a capacity of 198 addressable devices on one loop.
MS-9200UD
FIRE-LITE ALARMS
Northford, Conn.
CIRCLE #99 ON CARD
Voice Evacuation Panel
Digital power amplifier
The voice evacuation panel has an internal microphone, low-current draw, undistorted 25 or 50 Watt sine power and four speaker loop outputs. Two pre-recorded voice messages can be programmed into the digital message unit. The panel can operate stand-alone, with integral power supply, or powered with an external listed source.
Features: diagnostic meter bars; plug-in terminal connections; and an installer's system test button.
DVS-25/50
SIGNAL COMMUNICATIONS CORP.
Woburn, Mass.
CIRCLE #100 ON CARD
Fire Alarm Control Panel
For medium- to large-scale facilities
The control panel features a modular design that is configured per project requirements.
With one to 10 Signaling Line Circuits (SLCs), the panel supports up to 3,180 intelligent addressable devices. The panel has a 640-character LCD which presents information to operators concerning a fire situation, fire progression, and evacuation details.
NFS-3030 Fire Alarm Control Panel
NOTIFIER
Northford, Conn.
CIRCLE #101 ON CARD
Fire Alarm System Interface
Upgrades supplier's AUTOCALL Systems
The fire alarm system interface enables the supplier's existing AUTOCALL customers to upgrade their control panel to its 4100U fire alarm platform. The 4100U XA Loop Interface module enables the 4100U panel to serve as either the master panel or a data-gathering panel (DGP) in an AUTOCALL XA loop system.
4100U Fire Alarm Platform
SIMPLEXGRINNELL
Houston
CIRCLE #102 ON CARD
Smoke Control System
Controls smoke using network communication
The building management smoke control system integrates traditional environmental systems such as heating, ventilation, air conditioning, fire alarm and security. If a fire starts on a specific floor of a building, the building systems would react by decreasing air pressure on that floor, while simultaneously pressurizing the floors above and below to contain the smoke, clear evacuation routes and minimize smoke damage. The system supports a set of UL 864 (UUKL) Ethernet communications hardware and system equipment, that together can be configured as a stand-alone building control network or sub-network.
Metasys building management system
JOHNSON CONTROLS INC.
Milwaukee
CIRCLE #103 ON CARD
Want to use this article? Click here for options!
© 2008 Penton Media Inc.
Today's New Product
JVC PTZ Network Dome CameraThe indoor pan/tilt/zoom (PTZ) VN-V686U network dome camera from JVC Professional Products Co. features a 36x optical zoom lens that is powerful enough to capture an image of a ring on the finger of an intruder from far away. A silent direct drive mechanism provides subtle, fast and accurate PTZ operation. Other features include an auto-tracking function, which allows the system operator to tag a moving object for the camera to follow; 0.25-in. CCDs with 380,000 effective pixels; and full-motion, dual-stream JPEG and MPEG-4. |
advertisement
This month in Access Control
- Opening Up About Door Closers
- An Enterprise Approach
- The Framework For Open Systems
- On A Higher Plane
- More from April's issue
advertisement







